Home
Ask a Question
Secure Orders
Latest News
Reviews
Projects
Customer Gallery
Guides
FAQ
Live Testing

The Eheim 1048 pump known the world over for build quality and reliability. The 1048 is the smaller brother to the 1250 and is suitable for most watercooling projects. Package contains brass inlet and outlet barbs to fit 1048.

*Warning running this pump dry will void the warranty

$125.00 AUD
inc GST

BUY NOW using the secure orders button on the left

The Eheim 1250 is probably the most used of the Eheim range for water cooling projects. The pump output of this model is 1200l/h (264 Imp.gal/h). This makes the Eheim 1250 the overclockers choice in water pumps. Package contains brass inlet and outlet barbs to fit 1250.

*Warning running this pump dry will void the warranty

Out of Stock

$175.00 AUD
inc GST

BUY NOW using the secure orders button on the left

The Eheim Compact 600 has been for some time one of Europe's favorite pumps for water cooling. There have been multiple modifications produced for this pump from self contained reservoirs to modification for inline use. This sturdy little pump with a 1.3m Max head and 600l/h is certainly no sloth when it comes to moving liquid. Fully submersible and using 240 volts and 11watts of power during operation rounds out this pumps specifications.

H 84mm
D 65mm
W45mm

We are so impressed by this pumps performance that we are using this pump in our water chiller project because of its robust construction

*Warning running this pump dry will void the warranty

Out of Stock

$50.00 AUD
inc GST

BUY NOW using the secure orders button on the left

Auto-on PRS kit for AC (110V and 220V) water pump. Turns any AC pump on/off with your computer!

Relay Switch Circuit board socket Panel & screws.

Installation instructions included.

$37.00 AUD
inc GST

BUY NOW using the secure orders button on the left

Here's what Alphacool had to say about the pump station container.

This product is a kit for owners of a Eheim Compact 600 pump or for the upgrading of an old station!!

The tank is made up of polycarbonate, which makes it highly resistant to destruction. The cover is made of plexiglass. The container is provided with 1/4" connection threads and can be equipped with various adapters. The pump is mounted in such a way, so that the vibrations at the outlet are damped by an O-ring sealing, as well as by means of rubber footings. The filling hole has a diameter of 42mm (G1" - oil inspection glass), for a comfortable filling. The pump can be taken out together with the cover. For a bubble-free operation, there is a plexiglass hose extension at the inlet, so that water runs back into the hose after switching-off the pump - and no air. The container has 2x5mm LED bores up in the cover in order to give it an individual body structure. The new Eheim Station II is smaller and thus space saving, it fits even into 3,5”- slots.

The submerged pump station does not include the Eheim compact 600 pump.

Dimensions of the submerged pump container:
Width: 80cm
Height: 102cm
Depth: 93mm
Connections: 2x G1/4" internal screw thread
Filler plug: G1"-oil inspection glass
Others: 2x5mm LED drilling holes in the cover

The water tank is delivered without connections!

*Warning running this pump dry will void the warranty

$62.00 AUD
inc GST

BUY NOW using the secure orders button on the left

Here's what Alphacool had to say about the 12volt Eheim 1046 pump.

This high performance ceramic axle centrifugal 12V pump is designed for continuous use.

The base plate of the pump is variable therefore numerous mounting options are available.

The Eheim 1046-12v centrifugal pump is the ideal "engine" for your water cooling project, it is compact, often proven, quiet and works very reliably. Therefore we recommend this pump as a standard pump.

This variant of the Eheim pump is delivered as full ceramic(s) version with ceramic(s) axle and ceramic(s) bearings.
Durable quiet running is guaranteed.

The socket at the back of the PCI slot is meant for the 12Volt use outside of the case.

Technical data:
Pump Capacity: 300 l/h
Lifting height: 1.20 m
Capacity: 5 W
Dimensions L x B x H mm: 145 x 75 x 103

Extras:12V DC/AC PCI Slot plate

Note! This pump is delivered as in the picture without accessories. In order to install universal hose connectors, please order our adapters.

Now available with barbs to suit 1/4", 5/16" and 3/8" tubing.

*Warning running this pump dry will void the warranty

$135.00 AUD
inc GST

BUY NOW using the secure orders button on the left

This is the new and improved Laing D5 pump. The pump is capable of up to 1500L/h and 3.7M pump head.

This pump is used for water cooling of processors and electronic components. Due to its size and output, different ranges of application are available. This pump is an electronically commuted ball-motor pump, with running times of more than 50.000 hours at 12 V. The only flexible part of a ball motor pump is the spherical rotor unit, which is propped up against an extremely hard, wear-resistant ceramics bearing ball. A conventional axle with journal bearing and shaft sealing is not required. The spherical bearing of the rotor unit on the ceramic bearing provides a lot of advantages in that the development of the bearing play and thus noise increase is highly unlikely. The pump is silent over the whole running time.

The bearing is self-adjusting. It is lubricated directly by the delivery medium (wet-running pump). There is basically no need for maintenance. Since the rotor is always held magnetically in the intended position, smaller dirt particles are not a problem. Blocking of the pump is not possible under normal conditions. Even after lengthy downtimes a safe startup is ensured. The permanent magnetic rotor unit is propelled by a magnetic field, which is produced by the surrounding stator. This is built entirely around the rotor. The entire pump at 38mm is only a little higher than the stator itself. It easily fits into all conventional PC, Barebone and Mini PC cases. A separate magnetic shielding is not necessary under normal conditions. The ball motor and magnetic rotor principle develops comparatively high pump performance. The rotary controller adjustment on the rear of the pump can easily regulate the direct current over a large speed range. All parts which are likely to come in contact with the coolant medium are corrosion resistant.

The pump controller is five-step adjustable with 1.800-4.800 revs./min. Mounting plate is included in delivery!

Specifications:

Dimensions: (WxLxH) 90x90x90mm (without connections)
Motor type: electronically commuted ball motor
Rated voltage: 12 V DC direct current
Power input: 23 W
Admissible voltage area: 8 to 24 V
Delivery height: at 12V: 3,7m
max. Flow rate: 1500L/h
Delivery media: water, water-/glycol compounds
Max. System temperature: 60° C
Medium-affecting parts: stainless steel 1.4571, PPS-GF40, EPDM O-ring sealing,
Aluminium oxide, hard carbon
Connections: 2x 1/2" tubing connection

Others: this pump is five-step adjustable
P1 = 1.800 revs./min
P2 = 2.550 revs./min
P3 = 3.300 revs./min
P4 = 4.050 revs./min
P5 = 4.800 revs./min

*Warning running the pump without water will void the warranty.

$137.50 AUD
inc GST

BUY NOW using the secure orders button on the left

This is the Radiical Acetal pump head modification for the Laing DDC-12v Pump. The pump head can be supplied with 1/2" or 3/8" inlet and outlet barbs and if required 10mm compression fittings as illustrated. Alternatively the same head unit can accommodate a variety of inlet outlet options such as 1/2" inlet and 3/8" outlet. Barbs are not included. All fitting screws are included.

More information about this product is located here.

Radiical Turbo Head Fitting Guide is here.

Please Note;
The Radiical "Turbo Head" is a performance enhancement for the DDC-12v Laing pump. Use of the Radiical "Turbo Head" will void any pump warranty. Radiical warranty is limited to the "Turbo Head" only.

*Warning running any pump dry will void the warranty

$29.00 AUD
inc GST

BUY NOW using the secure orders button on the left

This is the Radiical Acrylic pump head modification for the Laing DDC 3.2 12v Pump. The pump head can be supplied with 1/2" or 3/8" inlet and outlet barbs and if required 10mm compression fittings. Barbs are not included and should be ordered separately. The Radiical Turbo Head can accommodate a variety of inlet outlet options such as 1/2" inlet and 3/8" outlet. All fitting screws are included.

More information about this product is located here.

Radiical Turbo Head Fitting Guide is here.

Please Note;
The Radiical "Turbo Head" is a performance enhancement for the DDC-12v Laing pump. Use of the Radiical "Turbo Head" will void any pump warranty. Radiical warranty is limited to the "Turbo Head" only.

*Warning running any pump dry will void the warranty

$29.00 AUD
inc GST

BUY NOW using the secure orders button on the left

This is the Radiical pump stand modification for the Laing DDC-12v Pump. The pump stand simplifies the location and improves the stability of the pump inside the case. The stand can be mounted either vertically or horizontally to simplify pump installation. All fitting screws are included.

$20.00 AUD
inc GST

BUY NOW using the secure orders button on the left

The optimal completion to the attachment for the Laing DDC pump.

This water tank is designed for the Alphacool DDC attachment. Each Alphacool DDC case can be optionally expanded with the water tank.

Technical data:

Dimension (LxWxH): 80 x 80 x 40mm (without connections, without pump)
Weight: 180g
Material: Plexiglas GS
Volume: 110ml

$55.00 AUD
inc GST

BUY NOW using the secure orders button on the left