| Radiical Computing - Leaders in a Liquid Cooled World! |
| Brass Thumb Nuts | ||
 |
Add a little bit of glitter with brass thumb nuts to replace those wing nuts or plastic thumb nuts. Threaded to accept 4mm thread. Pack of four |
$16.00 AUD BUY NOW using the secure orders button on the left |
| Brass Connectors Eheim 1250 | ||
 |
Brass barb connector to convert Eheim 1250 pump to 1/2" inlet and outlet. |
$10.50 AUD BUY NOW using the secure orders button on the left |
| Brass Connectors Eheim 1048 | ||
 |
Brass barb connector to convert Eheim 1048 pump to 1/2" inlet and outlet. |
$10.00 AUD BUY NOW using the secure orders button on the left |
| Brass Barbs For 1/2" Tubing | ||
 |
Brass barbs for half inch tubing and our Radiical radiators. |
$5.00 AUD each BUY NOW using the secure orders button on the left |
| Nickel Plated Barbs For 1/2" Tubing | ||
 |
Nickel Plated brass barbs for half inch tubing and our Radiical radiators |
$6.00 AUD each BUY NOW using the secure orders button on the left |
| Brass Barbs For 3/8 " Tubing | ||
 |
Brass barbs for 3/8 inch tubing and our Radiical radiators |
$5.00 AUD each BUY NOW using the secure orders button on the left |
| Nickel Plated Barbs For 3/8" " Tubing | ||
 |
Nickel Plated brass barbs for 3/8 inch tubing and our Radiical radiators |
$6.00 AUD each BUY NOW using the secure orders button on the left |
| Nickel Plated 'O' ring Barbs For 3/8 " Tubing | ||
 |
Nickel plated 'O' Ring barbed fitting for use with 3/8" ID Tubing. Can be fitted to radiators,water blocks and pump housings with G1/4 or 1/4" BSP mounting holes. |
$5.00 AUD each BUY NOW using the secure orders button on the left |
| D-TEK High Flow Reducer 1/2" to 3/8" | ||||
 |
|
$7.00 AUD each BUY NOW using the secure orders button on the left |
||
| D-TEK 'O' ring Barbs For 1/2 " Tubing | ||||
 |
|
$6.00 AUD each BUY NOW using the secure orders button on the left |
||
| D-Tek 'O' ring Barbs For 3/8 " Tubing | ||||
 |
|
$6.00 AUD each BUY NOW using the secure orders button on the left |
||
| Nickel Plated Thermochill Replacement Barbs for For 1/2 " Tubing | ||
 |
Nickel plated tapered barbs suitable to replace the standard plastic Thermochill radiator fittings. For use with 1/2 " ID Tubing. Use Teflon tape or paste to seal the threads. |
$6.50 AUD each BUY NOW using the secure orders button on the left |
| Nickel Plated Thermochill Replacement Barbs For 3/8 " Tubing | ||
 |
Nickel plated tapered barbs suitable to replace the standard plastic Thermochill radiator fitting. For use with 3/8" ID Tubing. Use Teflon tape or paste to seal the threads. |
$6.50 AUD each BUY NOW using the secure orders button on the left |
| Brass "Y" Piece for 1/2" Tubing | ||
 |
Brass Y piece for three barb water blocks and split GPU Sli systems. Suitable for 1/2 tubing. |
$17.00 AUD each inc GST BUY NOW using the secure orders button on the left |
| Brass "Y" Piece for 3/8" Tubing | ||
 |
Brass Y piece for three barb water blocks and split GPU Sli systems. Suitable for 3/8" tubing. |
$17.00 AUD each inc GST BUY NOW using the secure orders button on the left |
| Brass "T" Piece For 1/2" Tubing | ||
 |
Brass "T" piece for "T" lines and other fluid management applications where strength and deformation resistance are required. Now available for 1/2" tubing size. |
$11.00 AUD each inc GST BUY NOW using the secure orders button on the left |
| Nickel Plated Brass "T" Piece For 1/2" Tubing | ||
 |
Brass "T" piece for "T" lines and other fluid management applications where strength and deformation resistance are required. Now available for 1/2" tubing size. |
$12.00 AUD each inc GST BUY NOW using the secure orders button on the left |
| Brass "T" Piece For 3/8" Tubing | ||
 |
Brass "T" piece for "T" lines and other fluid management applications where strength and deformation resistance are required. Now available for 3/8" tubing size. |
$11.00 AUD each inc GST BUY NOW using the secure orders button on the left |
| Brass Nickel Plated "T" Piece For 3/8" Tubing | ||
 |
Nickel Plated Brass "T" piece for "T" lines and other fluid management applications where strength and deformation resistance are required. Now available for 3/8" tubing size. |
$12.00 AUD each inc GST BUY NOW using the secure orders button on the left |
| Brass Right Angle Fitting For 1/2" Tubing | ||
 |
Brass right angle fitting for use with single pass radiators to assist with tubing layout.
|
$7.50 AUD each inc GST BUY NOW using the secure orders button on the left |
| Nickel Plated Right Angle Fitting For 1/2" Tubing | ||
 |
Nickel plated right angle fitting for use with single pass radiators to assist with tubing layout.
|
$8.50 AUD each inc GST BUY NOW using the secure orders button on the left |
| Brass Right Angle Fitting For 3/8 " Tubing | ||
 |
Brass right angle fitting for use with single pass radiators to assist with tubing layout. |
$7.50 AUD each inc GST BUY NOW using the secure orders button on the left |
| Nickel Plated Right Angle Fitting For 3/8 " Tubing | ||
 |
Nickel plated right angle fitting for use with single pass radiators to assist with tubing layout. |
$8.50 AUD each inc GST BUY NOW using the secure orders button on the left |
| Nickel Plated Right Angle SLI Bridge Kit For 1/2 " Tubing | ||
 |
Nickel plated right angle bridge kit for use with SLI VGA cards and Northbridge chipset blocks. Bridges the tubing between the two cards in SLI or creates a tight turn for the Northbridge chipset. Assists with simplifying tubing layout when severe radius turns are required anywhere within the cooling loop. The kit is comprised of two Nickel plated right angled fittings, 150mm of tubing and two stainless steel tubing clamps.
|
$21.00 AUD each inc GST BUY NOW using the secure orders button on the left |
| Nickel Plated Right Angle SLI Bridge Fitting For 3/8 " Tubing | ||
 
|
Nickel plated right angle bridge kit for use with SLI VGA cards and Northbridge chipset blocks. Bridges the tubing between the two cards in SLI or creates a tight turn for the Northbridge chipset. Assists with simplifying tubing layout when severe radius turns are required anywhere within the cooling loop. The kit is comprised of two Nickel plated right angled fittings, 150mm of tubing and two stainless steel tubing clamps. |
$21.00 AUD each inc GST BUY NOW using the secure orders button on the left |
| Nickel Plated Compression Fitting For 5/16" ID 7/16"OD (8mm ID)(10mm OD)Tubing | ||
 |
These 10mm compression fittings are ideal replacements for push on fitting or conventional barbs in smaller kits. With their low profile they are also suitable for reducing radiator and some pump housing inlet and outlet sizes. Tubing size is 8mm ID and 10mm OD (5/16"OD). Threaded portion of the compression fitting is G1/4 or 1/4BSPP a sealant 'O 'ring is installed. |
$6.50 AUD each inc GST BUY NOW using the secure orders button on the left |
| Bitspower Compression Fitting For 3/8"ID 1/2"OD (10mm ID) (12mm OD)Tubing | ||
 |
These 10mm/ 3/8" ID compression fittings are ideal replacements for push on fitting or conventional barbs in smaller kits. With their low profile they are also suitable for reducing radiator and pump housing inlet and outlet sizes. Tubing size is 10mm ID (3/8") and 12mm OD (1/2"OD). The threaded portion of the compression fitting is G1/4 or 1/4BSPP a sealant 'O 'ring is installed. Theses fittings are to be used with tubing which has a 1/16" wall thickness. These fittings were used in this project. |
$9.50 AUD each inc GST BUY NOW using the secure orders button on the left |
| Bitspower Mini D Plug Joiner | ||
 |
Bitspower Min D Plug Joiner. Used to join components where a simple split apart facility is required. These joiners have a male G1/4 threaded portion at both ends |
$10.00 AUD each inc GST BUY NOW using the secure orders button on the left |
| Nickel Plated PCI Tubing Pass-through Plate | ||
 |
These PCI pass-through plates permit the passage of small diameter (10mm) sized tubing from the outside to the inside of the case via any vacant PCI slot. This simplifies fitting of tubing to the radiator or other components situated outside of the case.
|
$6.00 AUD each inc GST BUY NOW using the secure orders button on the left |
Home | Ask a Question | Secure Orders | Latest News | Reviews | Live Testing | Copper Plate | Fans | Filling Kits | Fittings | Fluid XP | Kits | Monitoring | Pumps | Radiators | Reservoir | Shrouds | TIM | Tubing | Water Blocks | Glossary | Legal Stuff | FAQ | Links | About Us | Contact
Copyright © Radiical Pty Ltd ABN 68 099 350 259- All Rights Reserved
Designed and Hosted at Aawsom
Revised: 23/08/2009 5:57:57 PM (AuDate)