
Radiical would like to take the opportunity to wish all our customers a very Merry Christmas and a Happy New Year.
We will be closing on the 19th of December until the 3rd of January. Orders received after the 19th of December will be processed when we return.
August 26, 2009
Added XSPC Dual DDC Pump reservoir for single and dual systems to the reservoirs page.

August 24, 2009
Added D-TEK 1/2" to 3/8" Reducers to fittings page.
August 19, 2009
The D-Tek Fuzion Blocks are back in stock with an important change. The FuZion block is now offered with either LGA775 or Core I7 mounting plates. Please note this when ordering.
July 15, 2009
Added Bitspower Mini D Plug to Fittings page and an Inline Ball valve to the Filling kits page.
July 02, 2009
Just confirming that after some delay the black R3400 in various sizes and 7/16"ID clear Tygon are now back in stock.
May 23, 2009
Today we have posted the Silverstone TJ08 Phenom2 Project on the Projects page.
May 11, 2009
We have just completed an overhaul of our Secure Order page. If you have any difficulty with selecting products please email us and we will complete your order.
April 25, 2009
Lest We Forget
They shall grow not old. As we who are left grow old. Age shall not weary them. Nor the years condemn. At the going down of the sun. And in the morning. We will remember them. Lest We Forget
April 10, 2009
Our XSPC stock has arrived and we have available the RX radiator range as well as the Delta CPU and chipset blocks.
March 20, 2009
We are expecting delivery of XSPC stock to arrive shortly. The most exciting inclusion in that delivery will be the range of RX radiators. We will have limited amounts of the full range shown below.


We will be accepting pre orders for the new RX range of radiators from today for those wanting to reserve a radiator.
We have also added the Delta V3 range of chipset and CPU blocks to the blocks page. We anticipate that these blocks will be available within a week.


March 14, 2009
We have a small number of D-TEK LGA1366 mounting sets available. These are suitable for Version 1 and 2 Fuzion blocks. For those of you who pre ordered please advise us if your notification email did not arrive.
Part Three of the Earth Cooler project has been posted. This section deals with the results of our prototype Earth Cooler. These can be viewed here.
March 12, 2009
Today we revisit one of our customer Gallery water cooling projects. Wombycat has been kind enough to let us have a look at the upgrades to his system since he first posted in our Customer Gallery. You can find the upgraded projects here.
March 10, 2009
Today we have posted Part Two of our Earth Cooler Project. It can be found here.
March 04, 2009
Today we have posted Part One of our Earth cooler project. This section deals with the construction of our prototype Earth Cooler. The project is located here.
January 13, 2009
We are starting to put together this years projects. The first of the projects will be an off the wall look at Earth cooling with a buried heat sink. We have been wanting to do this for some time now so in response to a number of requests for this type of cooling we are giving it a go. Stay tuned for more on this shortly.
The second project, which has been ongoing for some time now, is the development of a high performance sandwich radiator based system for the smaller case.The application for this type of high level cooling system will be highlighted as we fit the two triple radiators into an Antec 900 case. The second part of this project will be the building of our Phenom 2 system at which point we should be able to publish some thermal performance figures from the sandwich cooling.
Happy New Year to everyone from Radiical.
Hope you have a very successful and profitable year.
Copyright of Radiical Pty Ltd 2007 |